Contact Agrihire

 01473 744088

AH Engineering produce a range of robust flat trailers from 24 to 32 feet, all have commercial 10 stud axles and multi-leaf commercial suspension.

The chassis rails are twin 305 x 165 x 46mm universal beam which is very strong but still allows the trailer to flex as it should do. All the floor ribs are plasma cut and folded out of 5mm plate into a keyhole shape to fit the top of the chassis rail, this system this is unique to us and ensures that the trailer is very strong and flexible and also keeps the load height down to a minimum.

Side raves are of 100 x 75 x 8.0mm angle these are set with a 15mm upstand from the 4.5mm durbar floor plates. These floors are thick enough to withstand even the most aggressive use from fork lift tines the 15mm upstand is just enough to help hold on potato boxes and straw bales without fouling  fork lift tines or bale grabs.

We incorporate both rope hooks and a cleaver bar to hold a ratchet strap hook so it does not fall off when you go around to the other side of the trailer to pull it tight.

We can fit a hydraulic box nipper on the back of the trailer to save strapping on empty potato boxes this can also incorporate an easy sheet system that gives the operator a clear view from the tractor to fill the boxes, our customers tell us it is the best they have used. Back to the trailer, our sprung drawbar is an 18 tonne unit, we can offer a choice of extras including:

  • Box nipper
  • Easy sheet
  • Load lights
  • Oil/air braking
  • Steering axles
  • Rope boxes
  • Side walkways
  • Front/rear ladders

Click here to view the spec sheet Click here to view the specification sheet

Write a review

    Bad           Good
Captcha

AH Flat Trailer Sales

  • Please Call: 01473 744088